Masterlock 5m Cargo Lash

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 8mm
Anchor Length - 75mm
Washer Size - 10mm (M10)
Min Hole Depth - 55mm
Min Over Drill Depth - 15mm
Min. Embed Depth - 40mm
Max. Fixture Thickness - 35mm
Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 15mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 40Nm

Premium Quality Softwood Decking

- Profile machined from 32 x 125mm timber, finished size approx. 28 x 120mm
- Dual sided pattern - smooth / grooved
- Machined from 5th grade Redwood, quality slow-grown material
- Pressure treated green, 15 year Treated-Right Warranty, details in Downloads tab below
- Maximum joist centres - 450mm
- We have stocked this decking profile since 2010 due to popularity

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounted on top of walls.

- Designed to fit 100 x 100mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 108mm x 205mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

This tough geotextile, woven fabric successfully meets the demands of soft and hard landscaping.
Groundtex works above ground as a heavy duty weed barrier. It has excellent strength and tear resistance, and can also be used below ground as a stabilising and separating geotextile in groundwork and civil engineering applications.

Groundtex can be used beneath Type 1 aggregate, sharp / angular stone and gravel, including areas subject to pedestrian or vehicular traffic.