Metal Post Supports

This post support is designed to hold a 150 x 150mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 150 x 150mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 250 x 250mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 210mm hole centres)
- Manufactured from heavy gauge 3mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

This post support is designed to fit a 100 x 100mm square wooden post. The post support is driven 750mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 750mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The post support is driven 750mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 750mm
- Post Socket Length: 150mm
- Fin-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors