440mm Sleeper Fixing Pin - Corner - Galv.

Graded to meet BS5534 standards, this batten is used in the building trade for roofing projects.

- Stained Blue*, for grade identification purposes
- Fine-sawn finish
- Pressure treated
- Complies with BS5534

*If blue batten is not available we occasionally have gold batten which meets the same standard

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 1.2m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 1.8m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

A metal fixing plate designed for joining sleepers but could have many uses.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised finish

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish