440mm Sleeper Fixing Pin - Galv.

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

50mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 50mm thick
- Galvanised Steel

A metal corner stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 75mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 3.6m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 1.2m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green