Products tagged with 'METPOST'

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounted on top of walls.

- Designed to fit 100 x 100mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 108mm x 205mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Fin-Grip post securing system
- Bolt down plate: 170mm x 170mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 135mm hole centres)
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post extender is designed to extend a 100 x 100mm square wooden post. The metal fins inside of the post extender bite into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- External measurements: 107mm x 107mm x 175mm
- Internal midway stop-point to enable easy installation
- Manufactured from 2mm thick steel
- Welded construction
- Brown powder coat finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The post support is driven 750mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 750mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The post support is driven 750mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 750mm
- Post Socket Length: 150mm
- Fin-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

Ideal to use for repairing damaged fence posts which have broken off at ground level but are in a sound concrete base.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 300mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)

This post support is designed to hold a 75 x 75mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounting on top of walls.

- Designed to fit 75 x 75mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 95mm x 175mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 75 x 75mm square wooden post in position when it’s not possible to concrete a post into the ground. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- Fin-Grip post support system
- Bolt down plate: 150mm x 150mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 115mm hole centres)
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 75 x 75mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post extender is designed to extend a 75 x 75mm square wooden post. The metal fins inside of the post extender bite into the timber ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- External measurements: 81mm x 81mm x 175mm
- Internal midway stop-point to enable easy installation
- Manufactured from 2mm thick steel
- Welded construction
- Brown powder coat finish for durability outdoors

This post support is designed to fit a 75 x 75mm square wooden post. The post support is driven 600mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- Spike length: 600mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

Ideal to use for repairing damaged fence posts which have broken off at ground level but are in a sound concrete base.

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 80 x 80mm x 4.5mm
- Bolt Down Plate - 80 x 80mm x 4.5mm
- 11mm fixing holes (x8)