Oval Padbolt - Black

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 8mm
Anchor Length - 130mm
Washer Size - 10mm (M10)
Min Hole Depth - 55mm
Min Over Drill Depth - 15mm
Min. Embed Depth - 40mm
Max. Fixture Thickness - 90mm
Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 15mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 40Nm

Premium Quality Softwood Decking

- Profile machined from 32 x 125mm timber, finished size approx. 28 x 120mm
- Dual sided pattern - smooth / grooved
- Machined from 5th grade Redwood, quality slow-grown material
- Pressure treated green, 15 year Treated-Right Warranty, details in Downloads tab below
- Maximum joist centres - 450mm
- We have stocked this decking profile since 2010 due to popularity

A contemporary open tongue and grooved profile, also known as shadow gap.
A heavy duty cladding used to make gates, doors, sheds & other garden structures.
Produced from high quality redwood and pressure treated for durability outdoors.

- PTGV Profile (Planed Tongue & Groove, open 'V'-joint)
- Machined from: 25 x 150mm
- Finished thickness: 20mm
- Board coverage when fitted: 125mm
- High quality, slow grown redwood
- Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
- This profile can be installed vertically and horizontally
- 8 linear metres needed to cover 1m²

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Sawn & incised finish
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green