Posts & Postmix

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 3.0m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

1.8m Heavy Duty Angle Iron Stake, to suit 1200mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 100 x 100 x 1220mm
- Three bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 26kg

1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1500mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 28kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Premium quality, slow-grown timber. Pressure treated with planed finish (smooth). Popular uses include: outdoor joinery, newel posts, pergola posts, and for use as premium quality fence posts.

- Planed from 100 x 100mm, finished size approx. 94 x 94mm
- Good quality slow-grown softwood
- Planed finish, with rounded corners
- Pressure treated green UC4
- Often used for external joinery eg. decking newel posts

1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1800mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 35kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

General-purpose, pressure-treated, sawn finish timber. Mainly used as fence posts, but could have many other uses.

- Dimensions: 100 x 150mm x 2.4m
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

Timber posts with three 'V' notches for arris rails: designed to be used with 1.65m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.65m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post for improved treatment penetration
- UC4 Pressure Treatment - Green

Machined from a single piece of 100 x 100mm timber. These timber "H" posts are slotted to fit a standard fence panel.

- Machined from 100 x 100mm, finished size approx. 95 x 95mm
- Slots on 2 sides, 50mm wide x 20mm deep.
- Good quality slow-grown softwood
- Planed finish, with 4 rounded corners
- Pressure treated green, UC4 treatment class

2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2100mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 40kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Timber posts with three 'V' notches for arris rails: designed to be used with 1.8m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.8m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post for improved treatment penetration
- UC4 Pressure Treatment - Green

2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 46kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 3.6m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 125mm x 3.0m
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green