Posts & Postmix

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 3.6m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- Square ends, not weathered

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 150mm Diameter x 3.0m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 175 x 175mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 175 x 175mm x 2.1m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 3.0m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- Square ends, not weathered

2.4m Heavy Duty Angle Iron Stake, to suit 1800mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Galvanised Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 56kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 2.1m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 50kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Premium quality, slow-grown timber. Pressure treated with planed finish (smooth). Popular uses include: outdoor joinery, newel posts, pergola posts, and for use as premium quality fence posts.

- Planed from 100 x 100mm, finished size approx. 94 x 94mm
- Good quality slow-grown softwood
- Planed finish, with rounded corners
- Pressure treated green UC4
- Often used for external joinery eg. decking newel posts

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 4.8m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

2.4m Heavy Duty Angle Iron Stake, to suit 1800mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days