Posts & Postmix

1.8m Heavy Duty Angle Iron Stake, to suit 1200mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Galvanised Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

1.5m Heavy Duty Angle Iron Stake, to suit 900mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Galvanised Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 125 x 125mm x 3.0m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- Square both ends

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 125 x 125mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 52kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 125 x 125mm x 2.1m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

Round timber pole; popular as horse jump poles but can also be used in domestic gardens to build garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoors activities including raft building, obstacle courses etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are flat both (not chamfered).

- 100mm Diameter x 3.6m
- Pole; flat ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 125mm x 3.0m
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 3.6m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 46kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Timber posts with three 'V' notches for arris rails: designed to be used with 1.8m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.8m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post for improved treatment penetration
- UC4 Pressure Treatment - Green

2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2100mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 40kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Machined from a single piece of 100 x 100mm timber. These timber "H" posts are slotted to fit a standard fence panel.

- Machined from 100 x 100mm, finished size approx. 95 x 95mm
- Slots on 2 sides, 50mm wide x 20mm deep.
- Good quality slow-grown softwood
- Planed finish, with 4 rounded corners
- Pressure treated green, UC4 treatment class

Timber posts with three 'V' notches for arris rails: designed to be used with 1.65m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.65m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 150mm x 2.4m
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green