Posts & Postmix

Timber posts with three 'V' notches for arris rails: designed to be used with 1.8m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.8m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post for improved treatment penetration
- UC4 Pressure Treatment - Green

2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2100mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 40kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Machined from a single piece of 100 x 100mm timber. These timber "H" posts are slotted to fit a standard fence panel.

- Machined from 100 x 100mm, finished size approx. 95 x 95mm
- Slots on 2 sides, 50mm wide x 20mm deep.
- Good quality slow-grown softwood
- Planed finish, with 4 rounded corners
- Pressure treated green, UC4 treatment class

Timber posts with three 'V' notches for arris rails: designed to be used with 1.65m feather-edge boarding. Pressure treatment, incised, UC4.

- 100 x 125mm Timber Post
- 3 Triangular 'V'-notches to suit arris rail
- The notches are spaced to suit 1.65m Feather-edge + 150mm Gravel Board - more details in full description below
- Homegrown softwood, locally produced in the UK
- Sawn finish
- Incised at the bottom of the post for improved treatment penetration
- UC4 Pressure Treatment - Green

General-purpose, pressure-treated, sawn finish timber. Mainly used as fence posts, but could have many other uses.

- Dimensions: 100 x 150mm x 2.4m
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1800mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 35kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Premium quality, slow-grown timber. Pressure treated with planed finish (smooth). Popular uses include: outdoor joinery, newel posts, pergola posts, and for use as premium quality fence posts.

- Planed from 100 x 100mm, finished size approx. 94 x 94mm
- Good quality slow-grown softwood
- Planed finish, with rounded corners
- Pressure treated green UC4
- Often used for external joinery eg. decking newel posts

1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1500mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 28kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 100 x 100 x 1220mm
- Three bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 26kg

1.8m Heavy Duty Angle Iron Stake, to suit 1200mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 2.7m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 3.0m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 125mm x 2.4m
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 900mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

1.5m Heavy Duty Angle Iron Stake, to suit 900mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days