Posts & Postmix

Sawn timber post, pressure treated green. Mainly used for post & rail fencing, these posts have a 30° back-weathered top to help prevent rotting by allowing water to run off. Please note; the stated length includes the weathered top.

- 75 x 125mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 30° back-weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts for post and rail fencing but could have many other uses.

- Dimensions: 75 x 150mm x 2.1m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

1.8m Standard Angle Iron Stake, to suit 1200mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 3mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 2.1m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 600mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 75 x 75 x 990mm
- Two bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 14kg

Sawn timber post, pressure treated green. Mainly used for post & rail fencing, these posts have one flat end & one 30° back-weathered end to help prevent the top from rotting by allowing water to run off. Please note; the stated length includes the weathered top.

- 75 x 125mm x 1.8m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 30° back-weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

1.5m Standard Angle Iron Stake, to suit 900mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 3mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 100mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 100mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 3.0m
- Homegrown Softwood, locally produced in the UK
- Sawn & incised finish
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 100mm Diameter x 1.65m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 85mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Birds Mouth Posts are specialist treated softwood posts for Knee Rail Fencing, also known as Trip Rail Fencing. A birds mouth 'V' notch is cut into the top of the post to fit a square knee rail.

Popular rail sizes include: 75mm x 75mm & 100 x 100mm (sold as Square Timber Posts). Rails are fixed in place with metal knee Rail Straps (find them in "fencing materials" > "metal fencing brackets").

- Dimensions: 100 x 100mm x 1.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

- Other sizes can be cut to order, give us a call 0117 9674382 to enquire