Posts & Postmix

Light duty round timber stake, popular for use as tree stakes to support small trees and shrubs, also suitable for light duty or temporary fencing. Machine rounded stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 50mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.

- Post Length: 2485mm
- Suitable for 1.65m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 73kg Each

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 200mm Diameter x 3.0m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee