Posts & Postmix

2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 50kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 56kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Hardwood Anti-rattle Panel Wedge; designed to stop fence panels rattling when fitted into slotted concrete posts. To ensure a tight fit, tap the wedge into the gap between the fence panel and the post slot. Fix the wedge in position by driving a screw into the fence panel through the pre-drilled hole. For best results fit 4 wedges per panel, this may vary depending on your specific fence panel and concrete slot dimensions. This wedge is pressure treated brown.

- Hardwood Wedge
- Pre-drilled for 4.0mm screw
- Pressure Treated (brown)

Wedge Dimensions:
- Height: 52mm
- Width: 42mm
- Depth: (approx.)17mm tapering to 7mm

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.

- Post Length: 2485mm
- Suitable for 1.65m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 73kg Each

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 75 x 75 x 990mm
- Two bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 14kg

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 100 x 100 x 1220mm
- Three bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 26kg

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 600mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 900mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

Light duty round timber stake, popular for use as tree stakes to support small trees and shrubs, also suitable for light duty or temporary fencing. Machine rounded stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 50mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Light duty round timber stake, popular for use as tree stakes to support small trees and shrubs, also suitable for light duty or temporary fencing. Machine rounded stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 60mm Diameter x 2.4m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 75mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 85mm Diameter x 1.65m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 85mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 100mm Diameter x 1.65m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee