Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    Roughneck V-Series Claw Hammer - 20oz

    Manufacturer: Roughneck
    Roughneck® Gorilla V-Series Claw Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and is further controlled by an air-cushioned grip.

    Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The magnetic nail holder makes for effortless starting, particularly in hard-to-reach areas, whilst the mini-claw allows for embedded nails to be removed with ease. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.
    Availability: 4 in stock
    £19.99 Inc. VAT
    i h

    Roughneck® Gorilla V-Series Claw Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and is further controlled by an air-cushioned grip.

    Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The magnetic nail holder makes for effortless starting, particularly in hard-to-reach areas, whilst the mini-claw allows for embedded nails to be removed with ease. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.

    Products specifications
    Handle typePlastic grip
    Head weight20
    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of 1.8m Feather Edge Board

    1.8m Feather Edge Board

    125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
    Feather-edge can also be fitted horizontally as a budget cladding.

    - 125mm Board Width
    - 10 boards needed per linear metre (25mm overlap)
    - Cut from 22 x 125mm
    - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
    - Homegrown Spruce
    - Sawn finish
    - Pressure treated green
    Stock Availability: 7151 in stock
    From £1.54 Inc. VAT
    Picture of M10 Form C Washer

    M10 Form C Washer

    A heavy steel washer, for general use with bolts and threaded bar (studding).
    BZP (Bright Zinc Plate) finish.

    Dimensions: 2mm x 24mm Diameter
    11mm Bolt Hole: To suit M10 thread
    Stock Availability: 461 in stock
    From £0.16 Inc. VAT
    Picture of Arris Rail Bracket

    Arris Rail Bracket

    Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm.

    Angle: 62 x 62mm (suits 75mm Arris Rail)
    Wings: 42 x 155mm (overall width)
    Length: 285mm
    Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots
    Stock Availability: 743 in stock
    £0.98 Inc. VAT
    Picture of 7.5 x 122mm Masonry Screw

    7.5 x 122mm Masonry Screw

    A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
    To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

    T30 bit and white cover caps included when bought in box quantities of 100.

    Drill Bit Dia. - 6mm
    Min. Embed Depth - 45mm
    Head Type - T30 Torx
    Driver Type - Drill / Impact Driver
    Stock Availability: 459 in stock
    From £0.23 Inc. VAT
    Picture of M10 x 230mm Carriage Bolt

    M10 x 230mm Carriage Bolt

    Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

    Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

    Supplied with one standard hex nut, washers sold separately.
    Stock Availability: 128 in stock
    From £1.10 Inc. VAT
    Picture of 75mm x 3.0m Arris Rail

    75mm x 3.0m Arris Rail

    Arris rail is a triangular shaped fencing rail for use with feather edge fencing. This rail is designed to fit into notched posts or can be attached to standard posts with an arris rail bracket. Arris rail can also be used (under felt) around the edges of flat roofing, or as corner reinorcement when building wooden crates etc.

    - Cut from 75 x 75mm (Square)
    - Rail Dimensions: 74 x 74mm x 3.0m, 105mm on longest edge
    - Sawn Finish
    - Homegrown Softwood, locally produced in the UK
    - Pressure Treated - Green
    Stock Availability: 7 in stock
    £5.59 Inc. VAT