Simpson Strong-Tie

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of loor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

Pre-galvanised twisted restraint straps, designed for vertical loads.

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of loor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of loor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Galvanised fixing band has many building & DIY uses.

- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 100mm wide timber
- Width - 194mm (including fixing wings)
- Height - 232mm
- Depth - 55mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width - 145mm (including fixing wings)
- Length - 250mm
- Depth - 55mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 75mm wide timber
- Width - 169mm (including fixing wings)
- Height - 247mm
- Depth - 55mm

Twisted nails for the installation of joist hangers. Approx. 350 / kg

Nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plan.

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 150mm wide timber
- Width - 287mm (including fixing wings)
- Height - 440mm
- Depth - 55mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width - 145mm (including fixing wings)
- Length - 480mm
- Depth - 65mm

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width - 115mm (including fixing wings)
- Length - 62mm
- Depth - 48mm

Galvanised truss clips. Used to attach trusses, rafters & girders to wall plates to provide wind restraint.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of loor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plan.

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Dichromate coated galvanised mild steel
- Height Adjustable - 100mm min. to 150mm max.
- Threaded Core - 20mm diameter
- Top plate - 100 x 100mm x 5mm
- Base plate - 130 x 130mm x 5mm
- 12mm diameter holes for fixings

ADJUSTABLE REINFORCED ANGLE BRACKET - EFIXR553

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Steel S235JR according to NF EN 10025
- Hot-dip galvanized according to NF EN ISO 1461
- Total Height - 100mm
- Tubular Core - 48mm diameter
- Top plate - 100 x 100mm x 4mm
- Base plate - 130 x 130mm x 4mm
- 11mm diameter holes for fixings

The A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties.
Both framing anchors have a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

The A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties.
Both framing anchors have a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

Reinforced angle bracket with multiple applications.

Measurements:
A: 90mm
B: 90mm
C: 65mm
t: 2.5mm

LARGE T-BRACKET - 66T