Solid Forged Cable Laying Shovel

2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 46kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 150mm x 1829mm
- 20kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside.

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1800mm (approx. 6')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 3.6m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

Save 33% on this product when you pay in store & collect.
To receive the 33% discount, pay for this product in store or over the phone, then collect from our yard in Warmley (BS30 5JW). The discount does not apply to delivered orders or orders placed through our website.