Treatments, Stains & Finishes

Moss Green is an earthy traditional deep dark green that would sit perfectly in any garden, woodland, park or agricultural land. Shed & Fence Moss Green wood stain is easy to apply and leaves a beautifully natural looking matt finish with a soft sheen.

A time tested market favourite, Shed & Fence Wood Treatment is a waterproof wood stain that is long lasting and enhances the natural beauty of wood. Protek Shed & Fence treatment is a cost effective wood stain that can be applied to planed (finished) as well as rough sawn timber. This wood stain contains wax additives for the extra protection of a water resistant coating. It is a high-build formulation meaning that each additional coat will increase the depth of the colour, leaving a thicker coating with a richer sheen.

Protek Shed & Fence is a water-based wood stain with very low VOCs (volatile organic compounds) and virtually no odour, making it the ideal choice not only for fencing and sheds but all types of animal housing from chicken coups to kennels.

Protek Shed & Fence wood stain is available in many attractive and natural looking colours that can be applied by using a brush or a low pressure pump up garden sprayer. This product is a safe alternative to Creosote with good eco-credentials. Being water-based means that it is easy to clean up with warm water and detergent, negating the need for white spirit or paint stripping solutions.

Shed & Fence is an economical wood stain offering great coverage at up to 12m² per litre per coat. For fencing one coat will colour and weather-proof with a second coat deepening the shade. For sheds it is recommended that two coats be applied for the first treatment with only one coat needed for future maintenance.

Creosolve is a bitumen / wax based treatment that helps to protect exterior timber by repelling water and preventing ingress. Creosolve is similar to traditional Creosote but contains no biocide or preserver, making it safer for the environment and the user.
Coverage: 6-8m² / litre - apply 1 coat.

Creosolve is a bitumen / wax based treatment that helps to protect exterior timber by repelling water and preventing ingress. Creosolve is similar to traditional Creosote but contains no biocide or preserver, making it safer for the environment and the user.
Coverage: 6-8m² / litre - apply 1 coat.

Solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack. It is fast drying and is ideal for use on most common building surfaces.

Provides an effective waterproof, weatherproof, corrosion resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is suitable for application to a wide variety of materials including iron and steel, lead, zinc, aluminium, asbestos - cement, concrete, stone, wood, felt and brick and is mainly

Used for:
- Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, down pipes, fences, railings, gates etc.
- As a protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces
- Overcoating felt/wood

DO NOT use in areas where subsequent solvent contact is likely.
DO NOT use for potable drinking water tanks.

Approx. Coverage:
Porous surfaces: 4-6m² / litre (10-15m² / tin). Apply 2 coats
Non-porous surfaces: 11m² / litre (27.5m² / tin). Apply 2 coats

LONG LASTING END GRAIN PROTECTION FROM ROT, FUNGI & BLUE STAIN.
Formulated to be used on pressure treated timber where it has been cut, drilled or worked in any way to expose the untreated inner wood. Protects against fungal decay such as wet rot, wood discolouring fungus and wood boring insect attack. Penetrates strongly into end grain wood providing a water repellent finish. Contains resins and oils to give a long lasting effect.

Protects vulnerable exposed end grain
Specially formulated to deeply penetrate and protect cuts and notches
Ideal for decking & other cut pressure treated timbers

Coverage: 5-5.5m² / litre.

Barrettine Waterseal - is an effective general purpose, transparent, water repellent formulation for vertical surfaces. It penetrates exterior, dry, porous surfaces forming a water repellent barrier, helping to prevent water ingress and damage. Provides near invisible protection as long as the correct application instructions have been followed.

Barrettine water seal helps to protect brickwork, aged concrete, render, pointing, terracotta and timber. Not suitable for use on plywood.

Brick/Concrete - can be used on most types helping to prevent spalling caused by freezing and thawing. Also reduces efflorescence - white surface deposits.

Wood - can be used for waterproofing most types of wood excluding plywood. Can help reduce cracking, splitting, shrinking and swelling caused by wetting and drying. Once dry it is recommended to overcoat with a suitable wood treatment to enhance appearance.

Canvas/fabric - suitable for waterproofing tents, canvas, tarpaulins, groundsheets etc. Application by dipping will give best protection.
Note: some darkening of the fabric may occur after application.

Coverage: Up to 6m² / litre - apply 2 coats.

Find more information in downloads tab below

If you need UV protection for your wood, and need to retain the original wood colour as much as possible, Restol™ Natural UV Extra is the right choice for you!

Opacity: Transparent colour

Restol™ Natural UV Extra can also serve as a top coat, resulting in a final colour that is less saturated, leaving more of the original wood visible. Restol™ Natural UV Extra provides colourless protection for external wood.

Coverage: 12-16m² / litre. Apply 2 coats.

- For the prevention & eradication of woodworm, wood boring beetles & insects, Larvae and eggs
- For internal timber structures
- Low Odour Formulation
- More information in full description below

YOU MUST BE OVER THE AGE OF 18 TO PURCHASE THIS PRODUCT

Barrettine Decking Oil has been specially formulated to oil & protect in one application.

- Suitable for use on deck boards, deck tiles and balustrades.
- Also gives a good finish on summerhouses, sheds, fences & other wooden garden structures.
- Resistant to flaking & peeling.
- Water repellent.
- Harmless to plants & pets once dry.
- Gives a transparent / translucent finish colour effect to wood, the grain texture is still visible.

Coverage:
Up to 8m² / litre (40m² / tin) on smooth timber or
Up to 6m² / litre (30m² / tin) on sawn timber
Apply 1-2 coats.

Barrettine Decking Oil has been specially formulated to oil & protect in one application.

- Suitable for use on deck boards, deck tiles and balustrades.
- Also gives a good finish on summerhouses, sheds, fences & other wooden garden structures.
- Resistant to flaking & peeling.
- Water repellent.
- Harmless to plants & pets once dry.
- Gives a transparent / translucent finish colour effect to wood, the grain texture is still visible.

Coverage:
Up to 8m² / litre (40m² / tin) on smooth timber or
Up to 6m² / litre (30m² / tin) on sawn timber
Apply 1-2 coats.

Barrettine Decking Oil has been specially formulated to oil, protect & stain in one application.

- Suitable for use on deck boards, deck tiles and balustrades.
- Also gives a good finish on summerhouses, sheds, fences & other wooden garden structures.
- Resistant to flaking & peeling.
- Water repellent.
- Harmless to plants & pets once dry.
- Gives a transparent / translucent finish colour effect to wood, the grain texture is still visible.

Coverage:
Up to 8m² / litre (40m² / tin) on smooth timber or
Up to 6m² / litre (30m² / tin) on sawn timber
Apply 1-2 coats.

Barrettine Decking Oil has been specially formulated to oil, protect & stain in one application.

- Suitable for use on deck boards, deck tiles and balustrades.
- Also gives a good finish on summerhouses, sheds, fences & other wooden garden structures.
- Resistant to flaking & peeling.
- Water repellent.
- Harmless to plants & pets once dry.
- Gives a transparent / translucent finish colour effect to wood, the grain texture is still visible.

Coverage:
Up to 8m² / litre (40m² / tin) on smooth timber or
Up to 6m² / litre (30m² / tin) on sawn timber
Apply 1-2 coats.

Barrettine Decking Oil has been specially formulated to oil, protect & stain in one application.

- Suitable for use on deck boards, deck tiles and balustrades.
- Also gives a good finish on summerhouses, sheds, fences & other wooden garden structures.
- Resistant to flaking & peeling.
- Water repellent.
- Harmless to plants & pets once dry.
- Gives a transparent / translucent finish colour effect to wood, the grain texture is still visible.

Coverage:
Up to 8m² / litre (40m² / tin) on smooth timber or
Up to 6m² / litre (30m² / tin) on sawn timber
Apply 1-2 coats.

Barrettine Decking Oil has been specially formulated to oil, protect & stain in one application.

- Suitable for use on deck boards, deck tiles and balustrades.
- Also gives a good finish on summerhouses, sheds, fences & other wooden garden structures.
- Resistant to flaking & peeling.
- Water repellent.
- Harmless to plants & pets once dry.
- Gives a transparent / translucent finish colour effect to wood, the grain texture is still visible.

Coverage:
Up to 8m² / litre (40m² / tin) on smooth timber or
Up to 6m² / litre (30m² / tin) on sawn timber
Apply 1-2 coats.

Solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack. It is fast drying and is ideal for use on most common building surfaces.

Provides an effective waterproof, weatherproof, corrosion resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is suitable for application to a wide variety of materials including iron and steel, lead, zinc, aluminium, asbestos - cement, concrete, stone, wood, felt and brick and is mainly

Used for:
- Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, down pipes, fences, railings, gates etc.
- As a protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces
- Overcoating felt/wood

DO NOT use in areas where subsequent solvent contact is likely.
DO NOT use for potable drinking water tanks.

Approx. Coverage:
Porous surfaces: 4-6m² / litre (20-30m² / tin). Apply 2 coats
Non-porous surfaces: 11m² / litre (55m² / tin). Apply 2 coats