Concrete In Post Support

This post support is used to install 75 x 75mm square timber posts on top of a wall. The corner clamp ensures posts fit securely. The rectangular base plate has two 17mm holes for fixings, the opposite side has a 325mm strap which adds strength and stability when fixed to a wall.

- Designed to fit 75 x 75mm square timber posts
- Bolt-Grip post securing system
- Bolt down plate: 88mm x 150mm
- Bolt holes: 6 x 17mm Ø
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 75 x 75mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width