1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 1500mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 28kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 1800mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 35kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2100mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 40kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 46kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2700mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 52kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 3000mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 58kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
2.4m slotted concrete Corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 123mm x 130mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 66kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
2.7m slotted concrete corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 123mm x 130mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 66kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2400mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 50kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.
- Post Dimensions: 90mm x 110mm x 2700mm - Slot Dimensions: 55mm (tapering to 50mm) x 23mm - 56kg Each - C50 Concrete (a strong mix) - Four 5.5mm rebar set inside
Hardwood Anti-rattle Panel Wedge; designed to stop fence panels rattling when fitted into slotted concrete posts. To ensure a tight fit, tap the wedge into the gap between the fence panel and the post slot. Fix the wedge in position by driving a screw into the fence panel through the pre-drilled hole. For best results fit 4 wedges per panel, this may vary depending on your specific fence panel and concrete slot dimensions. This wedge is pressure treated brown.
Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.
- Post Length: 2205mm - Suitable for 1.35m Feather Edge + 150mm Gravel Board - Three Recesses for 47 x 75mm Rail - Use M8 x 180mm bolts to attach rails & gravel boards - 67kg Each
Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.
- Post Length: 2485mm - Suitable for 1.65m Feather Edge + 150mm Gravel Board - Three Recesses for 47 x 75mm Rail - Use M8 x 180mm bolts to attach rails & gravel boards - 73kg Each
Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).
- Dimensions: 75 x 75 x 990mm - Two bolt holes for M10 Carriage Bolts or M10 Coach Screws - 14kg
Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).
- Dimensions: 100 x 100 x 1220mm - Three bolt holes for M10 Carriage Bolts or M10 Coach Screws - 26kg