Concrete Posts

1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1500mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 28kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1800mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 35kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2100mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 40kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 46kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 52kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted concrete Corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.7m slotted concrete corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 50kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 56kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Hardwood Anti-rattle Panel Wedge; designed to stop fence panels rattling when fitted into slotted concrete posts. To ensure a tight fit, tap the wedge into the gap between the fence panel and the post slot. Fix the wedge in position by driving a screw into the fence panel through the pre-drilled hole. For best results fit 4 wedges per panel, this may vary depending on your specific fence panel and concrete slot dimensions. This wedge is pressure treated brown.
Screws sold separately.

- Hardwood Wedge
- Pre-drilled for 4.0mm screw
- Pressure Treated (brown)

Wedge Dimensions:
- Height: 52mm
- Width: 42mm
- Depth: (approx.)17mm tapering to 7mm

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.

- Post Length: 2485mm
- Suitable for 1.65m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 73kg Each

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 75 x 75 x 990mm
- Two bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 14kg

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 100 x 100 x 1220mm
- Three bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 26kg