Products tagged with 'fencing'

Traditional hinge joint stock fencing, the ideal stock fence to contain animals such as sheep and pigs. Typically fixed to wooden stakes with staples.

Manufactured in the UK to BS EN 10223-5.
The wire this fencing is made from is produced to BS4102.
Fully galvanised to BS EN 10244-2 Class A.

Pattern: C8/80/15
Height: 800mm
Roll length: 50m
Number of horizontal line wires: 8
Distance between vertical stay wires: 150mm

Top & bottom line wires: 3.0mm diameter
Intermediate line wires: 2.5mm diameter
Stay (vertical) wires: 2.5mm diameter

Traditional galvanised wire hinge joint stock fencing, the ideal stock fence to contain animals such as sheep and pigs. Normally fixed to wooden stakes with staples.
It is manufactured in the UK to BS EN 10223-5.
The wire used is produced to BS4102.
It is fully galvanised to BS EN 10244-2 Class A.

Pattern: L10/120/15:
Mild steel
Height: 1200mm
Roll length: 50m
Number of horizontal line wires: 10
Distance between vertical stay wires: 150mm

Top & bottom line wires: 2.5mm diameter
Intermediate line wires: 1.9mm diameter
Stay (vertical) wires: 1.9mm diameter

450mm Metal Peg, also known as a metal fence pin. This sturdy steel peg is suitable for path and edging, and for securing fencing gravel boards. The small profile of the peg makes it easier to drive into hard ground than the larger timber equivalent.

- 25mm x 25mm Steel Angle
- 2.0mm Thick Steel
- Galvanised
- Pointed to drive
- Three 6mm diameter holes in the corner for fixings

A heavy-duty digging tool, suitable for professional use. The ideal tool for digging post holes for fencing.

- Overall Length: 1750mm (approx.)
- Blade Width: 146mm
- Blade Length: 280mm
- Weight: 5kg (approx.)
- 38mm diameter round handle
- Square-tapered, hardened digging blade
- Welded reinforcement behind shovel neck to prevent bending
- Welded reinforcement sleeve at bottom of handle to add strength (increases handle diameter to 46mm)

A heavy-duty digging tool, suitable for professional use. The ideal tool for digging post holes for fencing.

- Overall Length: 1750mm (approx.)
- Blade Width: 145mm
- Blade Length: 250mm
- Weight: 5kg (approx.)
- 38mm diameter round handle
- Round-tapered, hardened digging blade
- Welded reinforcement behind shovel neck to prevent bending
- Welded reinforcement sleeve at bottom of handle to add strength (increases handle diameter to 46mm)

An extra heavy-duty digging tool, suitable for professional use. The ideal tool for digging post holes for fencing.

- Overall Length: 1750mm (approx.)
- Blade Width: 145mm
- Blade Length: 210mm
- Approx. Weight 5kg
- 38mm diameter, round handle
- Square, tapered digging shovel
- Welded reinforcement sleeve at bottom of handle to add strength (increases handle diameter to 46mm)
- Double reinforcement; welded behind and in front of shovel neck to prevent bending
- Rubber handle sleeve for comfort and grip
- Removable handle cap: the hollow handle can be filled with sand to add additional weight if required