Products tagged with 'panels'

The Reinas Gate complements our Reinas & Neris style of decorative fence panels. It's pressure treated for durability. We recommend fitting this gate with a curved rail hook and band hinge set, due to the curved frame design.

- Width: 900mm (approx. 3’)
- Height: 1800mm at highest point (approx. 6’), curve drops to 1600mm
- Gate thickness: 45mm
- Slatted cladding to match our range of decorative fence panels
- Can be hung for left or right-hand opening

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1219mm (4')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1524mm (5')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1829mm (6')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Madrid fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1800mm (approx. 6')
Height; edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1200mm (approx. 4')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1800mm (approx. 6')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Neris fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1200mm (approx. 4')
Height; edge of curve: 1000mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Neris fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1800mm (approx. 6')
Height; edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1219mm (4')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1524mm (5')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1829mm (6')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 914mm (3')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A premium quality Overlap Panel which is built to last.

Height: 1219mm (4')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 18 x 38mm)
- Framed top and bottom on both sides (approx. 18 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

A premium quality Overlap Panel which is built to last.

Height: 1524mm (5')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 18 x 38mm)
- Framed top and bottom on both sides (approx. 18 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.