Fencing Materials

15 metre roll of twin-strand barbed wire. Suitable for DIY security. Produced from high quality mild steel wire, made in the U.K.

- 2.0mm Line Wires (x2)
- 1.8mm Barbing wire (standard twist, 4 barb)
- 15m Roll
- Galvanised

Galvanised steel barbed wire bracket, designed to be fitted to the front or back of a post. It has two 11mm diameter holes for fixings. This bracket securely supports up to three lines of of barbed wire. Welded construction.

Dimensions:
Fixing Plate: 4mm x 37mm x 380mm
Angled Arm: 4mm x 37mm x 445mm
Angle of Arm: 135°
The angled arm finishes 280mm higher than the top of the fixing plate

Product code: 7IBWBW

90mm Ferrule Winder is a wire strainer for tensioning fencing line wire.

Length - 90mm
Width - 50mm

Fix the winder to the side of a post or use an angle cleat to fix the winder to the face of a post. Feed your wire through the hole in the barrel and then turn the barrel with a spanner or socket. Tighten the locking nut to securely hold the wire in place.

Barrel Strainers are a specialist product used to strain fencing line wire.
8mm (thread diameter) X 110mm (barrel length).

To strain the wire: first wind the central barrel anti-clockwise until the hook and the eye are fully extended. Attached the hook of the strainer to an eye bolt (attached to a fence post), then attach the wire you want to strain to the eye of the barrel strainer. Wind the central barrel of the strainer clockwise to tension the wire. When complete, the strainer remains in situ and can be re -tightened if the wire loses tension.

Ratchet Wire Strainers are a specialist product for straining fencing line wire and barbed wire.

To strain the wire: attach the base of the strainer to a post using the fixing hole, feed your wire through the hole in the barrel of the strainer and then wind the barrel with a spanner. When the wire reaches your required tension, engage the ratchet catch to secure the wire in place. The wire can easily be re-tensioned when required.