Gates & Gate Fittings

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

Surface mounted rimsashlock. Fixings & 2 keys included in the pack.
The spindle is included with the handle.

The New Zealand (NZ) Gate Fastener is a basic form of gate catch, typically used to secure field gates. The heavy-duty fastener hook has a spring loaded catch to prevent accidental opening. For extra security a padlock (not included) could be attached through the chain. Galvanised finish.

Staple:
Diameter: 8mm
Length: 65mm
Width: 45mm

Chain:
Length: 1000mm
Links: 6mm diameter x 25mm x 30mm

Fastener:
Length: 100mm
Diameter: 12mm

Designed for field and farm gates, these gate eyes are compatible with our wide range of 19mm gate hooks.
When using for steel gates, adjustable gate eyes can be bolted directly through the gate stile & the included nuts tightened each side, if you are hanging timber gates an adjustable bottom fitting is commonly used instead.

Padlockable sliding gate bolt.
All fixings included.

Padlockable sliding gate bolt.
All fixings included.

Grade 316 Stainless Steel ball bearing butt hinges with screws included.
Ideal for hanging internal doors, these hinges conform to BS EN1935 & are fire rated for use on 30 minute & 1 hour fire doors.

Light cabin hooks with all fixings included. Used for holding gates / doors open.

Light cabin hooks with all fixings included. Used for holding gates / doors open.

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

A hot-dip galvanised sliding gate bolt designed for animal enclosures. The bolt mechanism can only be operated with two hands when opening, it automatically locks when closed. Animals such as pigs, goats, sheep, horses etc. are unable to operate the bolt, the metal casing around the mechanism prevents curious animals accidentally opening the bolt.