Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc VAT
Product Catalogue
    Menu Close
    banner

    Fixings & Metalwork

    View as Grid List
    Sort by
    Display per page
    Picture of 1 LTR. BLACK JACK FELT ADHESIVE

    1 LTR. BLACK JACK FELT ADHESIVE

    A cold applied oxidised bitumen based adhesive
    Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings
    £9.84 incl VAT
    Picture of 1000mm X 30mm X 2.5mm FLAT STRAP

    1000mm X 30mm X 2.5mm FLAT STRAP

    For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
    £2.24 incl VAT
    Picture of 1000mm X 30mm X 2.5mm TWISTED STRAP

    1000mm X 30mm X 2.5mm TWISTED STRAP

    Pre-galvanised twisted restraint straps, designed for vertical loads.
    £2.24 incl VAT
    Picture of 1000mm X 30mm X 5mm FLAT STRAP

    1000mm X 30mm X 5mm FLAT STRAP

    For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
    £3.97 incl VAT
    Picture of 100mm CORNER BRACE

    100mm CORNER BRACE

    Can be used to strengthen inside corners and is less conspicuous compared to those mounted on the face
    Predrilled for use with countersunk screws
    £0.61 incl VAT
    Picture of 100mm CORNER PLATE

    100mm CORNER PLATE

    Sometimes known as an angle plate, these brackets are used for strengthening corner pieces of timber
    Predrilled for use with countersunk screws
    £0.50 incl VAT
    Picture of 100mm FLUSH HEAD TIMBERFAST SCREW

    100mm FLUSH HEAD TIMBERFAST SCREW

    Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.

    Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

    - Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
    - Screws and bit drivers can be sold individually when purchased in store or ordered by phone
    - Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
    £17.40 incl VAT
    Picture of 100mm MENDING PLATE

    100mm MENDING PLATE

    Used to reinforce joints, these joints are pre-drilled for use with countersunk screws
    £0.31 incl VAT
    Picture of 100mm T PLATE

    100mm T PLATE

    Predrilled for use with countersunk screws
    £0.94 incl VAT
    Picture of 100mm VINE EYE TO SCREW

    100mm VINE EYE TO SCREW

    100mm VINE EYE TO SCREW
    £0.40 incl VAT
    Picture of 110mm FENCEMATE ADJUSTABLE BOLT DOWN POST SUPPORT

    110mm FENCEMATE ADJUSTABLE BOLT DOWN POST SUPPORT

    A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

    Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

    - Welded construction, galvanised steel
    - Total Height - 255mm
    - Threaded bar - 22mm diameter
    - Square support plate - 100 x 100mm x 4.5mm
    - Bolt Down Plate - 100 x 100mm x 4.5mm
    - 11mm holes for fixings
    £15.98 incl VAT
    Picture of 125mm FLUSH HEAD TIMBERFAST SCREW

    125mm FLUSH HEAD TIMBERFAST SCREW

    Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.

    Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

    - Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
    - Screws and bit drivers can be sold individually when purchased in store or ordered by phone
    - Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below
    £22.10 incl VAT
    Picture of 13mm FELT CLOUT NAILS - 500g BAG

    13mm FELT CLOUT NAILS - 500g BAG

    Galvanised nails with an extra large head, ideal for fixing shed felt.
    £3.97 incl VAT
    Picture of 150mm CORNER BRACE

    150mm CORNER BRACE

    Can be used to strengthen inside corners and is less conspicuous compared to those mounted on the face
    Predrilled for use with countersunk screws
    £1.48 incl VAT
    Picture of 150mm EYE BOLT

    150mm EYE BOLT

    BZP folded eye bolts, used for straining and tightening wires.
    £1.55 incl VAT
    Filters Close
    Min: £0.00 Max: £78.00
    £0 £78