Fixings & Metalwork

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below

Galvanised staples, often used for securing wire.

Galvanised fixing band FB20A has many building & DIY uses.

- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings

Folded eye bolt, used for straining and tightening wires.

- Length: 250mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish

Galvanised staples, often used for securing wire.

500 gram bag of sherardised panel pins

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

Injection resin used for anchoring threaded bar into concrete, stone, masonry, brickwork and hollow masonry.

- One mixer nozzle supplied per 300ml tube, extra nozzles available to purchase separately
- Two part resin, apply in one single action with a caulking gun
- Suitable for indoor and outdoor applications
- Colour: Grey

Galvanised staples, often used for securing wire.

3.75x30mm Square twisted nails for the installation of joist hangers. Approx. 350 / kg

Galvanised staples, often used for securing wire.