Fixings & Metalwork

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

Stainless steel nails with a serrated annular ring pattern along the shank; for extra pull-out resistance. This is the correct nail for installing Cedar Shingles. The clout head firmly secures shingles and helps to prevent the nail being over-driven or pulled through the timber by strong winds.

31mm x 1.8mm Stainless Steel Ring Clout Nail
1kg pack = approximately 1500 nails
1kg of nails will install approximately 4 bundles of Cedar Shingles

Stainless steel annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power.

Nail Length: 38mm
Nail gauge: 2.65mm
Average nail count = 350 /kg
Material: A2 Stainless steel, service class 3
Manufactured to BS 1202-1

Stainless steel annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power.

Nail Length: 50mm
Nail gauge: 2.65mm
Average nail count = 410 /kg
Material: A2 Stainless steel, service class 3
Manufactured to BS 1202-1

Stainless steel lost head nails for fixing timber to timber. This nail has a small head and is suited to external carpentry.

Nail Length: 50mm
Nail gauge: 2.65mm
Average nail count = 410 /kg
Material: A2 Stainless steel, service class 3
Manufactured to BS 1202-1

Cut point staples, typically used for attaching wire and netting to timber.

Staple length: 20mm
Staple gauge: 2.0mm
Average staple count = 1079 /kg
Finish: Galvanised, service class 3

Cut point staples, typically used for attaching wire and netting to timber.

Staple length: 25mm
Staple gauge: 2.65mm
Average staple count = 486 /kg
Finish: Galvanised, service class 3

Cut point staples, typically used for attaching wire and netting to timber.

Staple length: 30mm
Staple gauge: 3.55mm
Average staple count = 260 /kg
Finish: Galvanised, service class 3

Cut point staples, typically used for attaching wire and netting to timber.

Staple length: 40mm
Staple gauge: 4.0mm
Average staple count = 136 /kg
Finish: Galvanised, service class 3

Square twisted nails; the recommended fixing for installation of joist hangers.

Nail length: 30mm
Nail gauge: 3.75mm
Average nail count = 350 /kg
Finish: Sherardised, service class 2

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish.

Pin length: 25mm
Pin gauge: 1.6mm
Average pin count = 2340 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish.

Pin length: 40mm
Pin gauge: 1.6mm
Average pin count = 1590 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1

Short galvanised nails with an extra large clout head, designed for fixing down shed felt.
Approximately 345 nails per 500g pack.

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 8mm
Anchor Length - 75mm
Washer Size - 10mm (M10)
Min Hole Depth - 55mm
Min Over Drill Depth - 15mm
Min. Embed Depth - 40mm
Max. Fixture Thickness - 35mm
Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 15mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 40Nm