Gates & Gate Fittings

All fixings included.

Stainless Steel press fit security collar, designed to prevent gates from being lifted off of a 19mm hook.

A central closing catch designed to suit the spring gate fastener set. This catch enables the gate to be latched when hung between posts instead of on the back of posts. Galvanised finish for durability.

Catch length: 150mm
Catch depth: 35mm (max)
Fixing holes: two holes - 12mm Ø

RIM LOCK HANDLE

This galvanised field gate hinge set has an off-set bottom pivot point (rocker plate) which causes the swinging end of a field gate to rise as it opens. The rising effect allows the gate to open on an incline. The off-set pivot point causes the gate to return to the centre when not held in the open position, this works as a self-closing mechanism. This type of hinge is often used for pedestrian field gates to ensure that gates aren't accidentally left open.

The rising effect is more prominent with longer gates. The approximate rise (at the swinging end) is 75mm per metre of gate width - e.g. if fitted to a 10' (3.05m) gate, the rise at the swinging end is approx. 229mm.

Suitable for hanging 75mm thick wooden field gates, this hinge this type of hinge can only be fitted between posts (not on the back of posts), which allows the gate to swing forward and backwards.

Set includes:
1x 600mm (24") double strap top band
1x bottom gate fitting with rocker plate
1x field gate hook to bolt
All necessary fixings
Galvanised finish

Padlockable gate catch, that stays shut once the striker has gone into the keep.
Fixings included.

A galvanised metal bracket set designed to hold a removable, sliding fence rail. Often used as a cheaper alternative to a field gate. A rotating catch is incorporated, this slots into a notch cut into the sliding rail. The catch prevents the rail being accidently removed when animals push against it.

Maximum rail size: 50mm x 110mm
Fixings included

Spring loaded sliding bolt, ideal for use on gates, garage doors.
Fixings included in the pack.

Available in Iroko (hardwood) & softwood, Stafford Gates make an impressive entrance.
Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice.

Made to order using a strong, morticed & tenoned construction, Stafford Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high.
Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail.

The stiles on the Stafford Gate can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

The thumb piece passes through the door and raises the latch bar off the keep.
All fixings are included.

The thumb piece passes through the door and raises the latch bar off the keep.
All fixings are included.

Available in Iroko (hardwood) & softwood, Swept Top Manor Gates make an impressive entrance.
Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice.

Made to order using a strong, morticed & tenoned construction, Swept Top Manor Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high.
Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail.

The stiles on the Swept Top Manor Gates can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

Light duty catch, popular for use in animal housing.