Gates & Gate Fittings

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

Manufactured in pressure treated softwood or in untreated Iroko (hardwood) to the highest standards, the Estate Gate makes an impressive entrance.
Estate Gates can be made to order with special height & widths typically taking 3 - 4 weeks. If you intend to automate the gate, a reinforced bottom rail can be supplied for added strength and rigidity.

Estate gates are handed - L/H means that the gate is hung on the left hand side (as you look in from the outside of the property).

Please note that all Estate gates should be fitted with:
• 1x adjustable hinge set per gate
• 1x drop bolt per gate
• 1x gate catch per gate OR
• 1x throw over gate loop per pair

A premium quality picket gate constructed with planed all round and pressure treated softwood. It has a sturdy mortice & tenoned frame which is built to last. This gate matches our stocked round top picket slats; perfect if the gate is to be fitted within a run of picket fencing.

- Gate Width: 900mm (approx. 3')
- Overall Height: 1200mm (approx. 4’)
- Picket Size: 20mm x 70mm x 900mm
- Gate Thickness: 45mm
- Left hand opening; hinges to be fitted on the left (when viewed from front)

The Town Gate is a high quality, treated softwood pedestrian gate that will look at home in any setting. It has a mortice and tenoned, frame ledged and braced frame with sturdy T&G cladding, finished with capping.

- Width: 900mm (approx. 3’)
- Height: 1525mm (approx. 5’)
- Gate thickness: 45mm
- T&G Cladding (ex. 19 x 100mm)
- Can be hung for left or right-hand opening

The Babington gate is a good quality treated softwood feather-edge pedestrian gate that will suit all budgets. It has a strong mortice and tenoned, frame ledged and braced design with sturdy feather-edge cladding. This gate doesn't have capping; there isn’t a top or bottom; the gate can be turned to match the direction of feather-edge fencing if needed.

- Width: 900mm (approx. 3’)
- Height: 1760mm (approx. 6’)
- Gate thickness: 45mm
- Feather-edge cladding (ex. 22 x 125mm)
- Can be hung for left or right-hand opening