Gates & Gate Fittings

Spring loaded sliding bolt, ideal for use on gates, garage doors.
Fixings included in the pack.

A galvanised metal bracket set designed to hold a removable, sliding fence rail. Often used as a cheaper alternative to a field gate. A rotating catch is incorporated, this slots into a notch cut into the sliding rail. The catch prevents the rail being accidently removed when animals push against it.

Maximum rail size: 50mm x 110mm
Fixings included

Padlockable gate catch, that stays shut once the striker has gone into the keep.
Fixings included.

This galvanised field gate hinge set has an off-set bottom pivot point (rocker plate) which causes the swinging end of a field gate to rise as it opens. The rising effect allows the gate to open on an incline. The off-set pivot point causes the gate to return to the centre when not held in the open position, this works as a self-closing mechanism. This type of hinge is often used for pedestrian field gates to ensure that gates aren't accidentally left open.

The rising effect is more prominent with longer gates. The approximate rise (at the swinging end) is 75mm per metre of gate width - e.g. if fitted to a 10' (3.05m) gate, the rise at the swinging end is approx. 229mm.

Suitable for hanging 75mm thick wooden field gates, this hinge this type of hinge can only be fitted between posts (not on the back of posts), which allows the gate to swing forward and backwards.

Set includes:
1x 600mm (24") double strap top band
1x bottom gate fitting with rocker plate
1x field gate hook to bolt
All necessary fixings
Galvanised finish

RIM LOCK HANDLE