Gates & Gate Fittings

Light duty catch, popular for use in animal housing.

Available in Iroko (hardwood) & softwood, Swept Top Manor Gates make an impressive entrance.
Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice.

Made to order using a strong, morticed & tenoned construction, Swept Top Manor Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high.
Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail.

The stiles on the Swept Top Manor Gates can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

The thumb piece passes through the door and raises the latch bar off the keep.
All fixings are included.

The thumb piece passes through the door and raises the latch bar off the keep.
All fixings are included.

Available in Iroko (hardwood) & softwood, Stafford Gates make an impressive entrance.
Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice.

Made to order using a strong, morticed & tenoned construction, Stafford Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high.
Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail.

The stiles on the Stafford Gate can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

Spring loaded sliding bolt, ideal for use on gates, garage doors.
Fixings included in the pack.

A galvanised metal bracket set designed to hold a removable, sliding fence rail. Often used as a cheaper alternative to a field gate. A rotating catch is incorporated, this slots into a notch cut into the sliding rail. The catch prevents the rail being accidently removed when animals push against it.

Maximum rail size: 50mm x 110mm
Fixings included

Padlockable gate catch, that stays shut once the striker has gone into the keep.
Fixings included.

This galvanised field gate hinge set has an off-set bottom pivot point (rocker plate) which causes the swinging end of a field gate to rise as it opens. The off-set pivot point causes the gate to return to the centre when not held in the open position.

- The approximate rise (at the swinging end) is 75mm per metre of gate width - e.g. if fitted to a 10' (3.05m) gate, the rise at the swinging end is approx. 229mm.
- Suitable for hanging 75mm thick wooden field gates.
- This hinge this type of hinge can only be fitted between posts (not on the back of posts), which allows the gate to swing forward and backwards.
- The minimum post size that the rocker plate can be fitted to is 175mm.

Set includes:
1x 600mm (24") double strap top band
1x bottom gate fitting with rocker plate
1x field gate hook to bolt
All necessary fixings
Galvanised finish

RIM LOCK HANDLE

A central closing catch designed to suit the spring gate fastener set. This catch enables the gate to be latched when hung between posts instead of on the back of posts. Galvanised finish for durability.

Catch length: 150mm
Catch depth: 35mm (max)
Fixing holes: two holes - 12mm Ø

Stainless Steel press fit security collar, designed to prevent gates from being lifted off of a 19mm hook.

All fixings included.

All fixings included.

Galvanised for durability, these plain ring latches that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.