Fencing Materials

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1676mm (5'6")
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1829mm (6')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 914mm (3')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1219mm (4')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1524mm (5')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

A heavy-duty Close Board Panel which is built to last. A sturdy option suitable for exposed, windy areas. Previously known as the Suffolk panel.

Height: 1829mm (6')
Width: 1829mm (6')

- Fully pressure treated fence panels,
- ex. 22 x 125mm Feather Edge slats with fine-sawn finish,
- Sturdy jointed framework on the back of the panel,
- Nailed construction; stainless steel fixings,
- Finished and protected with a top capping strip,

Our 125mm feather Edge Boarding will match these panels and can be purchased separately to make your own non-standard panel sizes if needed.

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1219mm (4')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1524mm (5')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1829mm (6')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1200mm (approx. 4')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1800mm (approx. 6')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Neris fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1200mm (approx. 4')
Height; edge of curve: 1000mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Neris fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1800mm (approx. 6')
Height; edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Reinas fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1200mm (approx. 4')
Height; edge of curve: 1000mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Reinas fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1800mm (approx. 6')
Height; edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.