Fencing Materials

Fine sawn finish timber post cap for 100 x100mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 26mm x 119mm x 119mm
- Chamfered four sides
- Pressure treated

Planed finish timber post cap for 75 x 75mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 45mm (middle) x 99mm x 99mm
- Decorative chamfer on four sides
- Pressure treated
- Includes double ended screw (attached)

Planed finish timber post cap for 100 x 100mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 50mm (middle) x 125mm x 125mm
- Decorative chamfer on four sides
- Pressure treated
- Includes double ended screw (attached)

Decorative wooden Acorn Finial to fit 75 x 75mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps.

- Dimensions: 119mm High x 62mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

Decorative wooden Acorn Finial to fit 75 x 75mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps, sold separately.

- Dimensions: 153mm High x 81mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

Decorative wooden Ball Finial to fit 75 x 75mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps, sold separately.

- Dimensions: 92mm High x 69mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

Decorative wooden Ball Finial to fit 100 x 100mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps, sold separately.

- Dimensions: 123mm High x 93mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 150mm x 1829mm
- 20kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside.

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 300mm x 1829mm
- 44kg Each
- C50 Concrete (a strong mix)
- Three 5.5mm rebar set inside.

1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1500mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 28kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1800mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 35kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2100mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 40kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 46kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 52kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside