Fencing Materials

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounted on top of walls.

- Designed to fit 100 x 100mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 108mm x 205mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

Wire netting is popular for making poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing.
This wire netting is produced using galvanised wire, it is also hot dipped galvanised after manufacture to offer double corrosion resistance.

Height: 600mm
Length: 10m
Mesh Size: 50mm
Wire Gauge: 19g (1.0mm)
Manufactured to BS EN 10223-2 1998 Reverse Twist Specification.

25m & 50m rolls are available to order, typical lead time 1-2 working days. Call us on 0117 9674382 for prices and availability.

Decorative wooden Ball Finial to fit 100 x 100mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps, sold separately.

- Dimensions: 123mm High x 93mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

Planed finish fencing rails with two 45° chamferred corners. Ideal for use with our planed picket slats with a smooth, premium finish but has many other uses including deck boards and bench slats.
These fencing rails are pressure treated green; 15 year Treat-Right Warranty.

- Planed all round timber, with two 45° chamfered corners
- Machined from: 32 x 100mm x 3.6m
- Finished Size: 28 x 95mm x 3.6m
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Fin-Grip post securing system
- Bolt down plate: 170mm x 170mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 135mm hole centres)
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors