Fencing Materials

Gravel board packers are fitted to the bottom of a fence post, this ensures the gravel board fits flush with the bottom of the featheredge (when fixing 38 x 88mm rails to the face of the posts).

- 150mm lengths
- Fully pressure treated
- Typically one packer required per post

30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.

- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel

35mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 35mm thick
- Galvanised Steel

45mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 45mm thick
- Galvanised Steel

50mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 50mm thick
- Galvanised Steel

A Heavy duty adjustable bracket for attaching chainlink stretcher bars to fence posts, they could also be used as a heavy duty angle bracket to connect timbers such as sleepers.

• Slotted fixing holes for horizontal and vertical adjustment
• Galvanised for corrosion resistance

Thickness: 5.0mm
External: 44mm x 44mm
Internal: 38mm x 38mm
Height: 40mm
Fixing Slots: 10mm x 18mm

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm.

Angle: 62 x 62mm (suits 75mm Arris Rail)
Wings: 42 x 155mm (overall width)
Length: 285mm
Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

52mm Easy Fix Panel Clip for attaching fence panels to wooden posts. Easy Fix Panel Clips are first fitted to your fence panel and then secured to the post, eliminating the problem of lifting the panel high enough to slot into traditional 'U' shaped panel clips.

- Fits fence panels up to 52mm thick
- Minimum post width required - 85mm
- Brown Powder Coating

47mm Easy Fix Panel Clip for attaching fence panels to wooden posts. Easy Fix Panel Clips are first fitted to your fence panel and then secured to the post, eliminating the problem of lifting the panel high enough to slot into traditional 'U' shaped panel clips.

- Fits fence panels up to 47mm thick
- Minimum post width required - 80mm
- Brown Powder Coating

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

A single 15mm thick timber packing strip, used to increase the width of 1800mm wide fence panels to 1830mm (6').

Fence panels manufactured in the U.K. are normally 6' wide (1830mm), fence panels manufactured in European countries are normally 1800mm wide. Packing strips can be attached to both sides of fence panels to increase their width from 1800mm to 1830mm, this enables 1800mm panels to fit between posts that were installed to suit 1830mm ( 6' ) wide panels.

Packing strips are also needed if 1800mm wide fence panels are being fitted with 1830mm concrete gravel boards.

Two Packing Strips are required per fence panel, attach them to the panel with 30mm panel pins or screws.

This Length of packing strip will suit:
Milano - 1.2m
Neris Convex - 1.1m
Reinas Convex - 1.1m

A single 15mm thick timber packing strip, used to increase the width of 1800mm wide fence panels to 1830mm (6').

Fence panels manufactured in the U.K. are normally 6' wide (1830mm), fence panels manufactured in European countries are normally 1800mm wide. Packing strips can be attached to both sides of fence panels to increase their width from 1800mm to 1830mm, this enables 1800mm panels to fit between posts that were installed to suit 1830mm ( 6' ) wide panels.

Packing strips are also needed if 1800mm wide fence panels are being fitted with 1830mm concrete gravel boards.

Two Packing Strips are required per fence panel, attach them to the panel with 30mm panel pins or screws.

Fine sawn finish timber post cap for 75 x 75mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 23mm x 99mm x 99mm
- Chamfered four sides
- Pressure treated

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

90mm Ferrule Winder is a wire strainer for tensioning fencing line wire.

Length - 90mm
Width - 50mm

Fix the winder to the side of a post or use an angle cleat to fix the winder to the face of a post. Feed your wire through the hole in the barrel and then turn the barrel with a spanner or socket. Tighten the locking nut to securely hold the wire in place.

Fine sawn finish timber post cap for 100 x100mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 26mm x 119mm x 119mm
- Chamfered four sides
- Pressure treated

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Galvanised Steel Knee Rail Strap with 90° bend; for fixing rails used with birdsmouth posts. These straps can be bent in situ to suit various sizes of knee rail fencing.

Dimensions: 0.8mm x 75mm x 500mm (250mm either side of bend)
Fixing Holes: (10x) 4.0mm

Premium quality planed finish Picket Slats. Machined from 22 x 75mm joinery grade Scandinavian redwood, pressure treated green with a 15 year guarantee. Picket Slats are sold individually; build the fence to your own specification.

- Dimensions: 20 x 70 x 900mm (finished sizes)
- Pointed Top
- Planed all round
- Premium Quality Scandinavian Redwood
- Pressure treated with 15 Year Guarantee - details in downloads tab below

If you would like help to calculate the materials you need, please give us a call 0117 9674382.

Premium quality planed finish Picket Slats. Machined from 22 x 75mm joinery grade Scandinavian redwood, pressure treated green with a 15 year guarantee. Picket Slats are sold individually; build the fence to your own specification.

- Dimensions: 20 x 70 x 900mm (finished sizes)
- Round Top
- Planed all round
- Premium Quality Scandinavian Redwood
- Pressure treated with 15 Year Guarantee - details in downloads tab below

If you would like help to calculate the materials you need, please give us a call 0117 9674382.

Galvanised Steel Flat Knee Rail Strap; used to fit knee rails in place (the rails used with birds mouth posts). These straps can be bent in situ to suit various sizes of knee rail fencing.

Dimensions: 0.8mm x 75mm x 500mm
Fixing Holes: (10x) 4.0mm