Fencing Materials

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 914mm (3')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

A premium quality Overlap Panel which is built to last.

Height: 914mm (3')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1219mm ( 4’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 300mm x 1829mm
- 44kg Each
- C50 Concrete (a strong mix)
- Three 5.5mm rebar set inside.