Fencing Materials

950mm GALV CHAINLINK STRETCHER BAR

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm.

Angle: 62 x 62mm (suits 75mm Arris Rail)
Wings: 42 x 155mm (overall width)
Length: 285mm
Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

Galvanised steel barbed wire bracket, designed to be fitted to the front or back of a post. It has two 11mm diameter holes for fixings. This bracket securely supports up to three lines of of barbed wire. Welded construction.

Dimensions:
Fixing Plate: 4mm x 37mm x 380mm
Angled Arm: 4mm x 37mm x 445mm
Angle of Arm: 135°
The angled arm finishes 280mm higher than the top of the fixing plate

Product code: 7IBWBW

Barrel Strainers are a specialist product used to strain fencing line wire.
8mm (thread diameter) X 110mm (barrel length).

To strain the wire: first wind the central barrel anti-clockwise until the hook and the eye are fully extended. Attached the hook of the strainer to an eye bolt (attached to a fence post), then attach the wire you want to strain to the eye of the barrel strainer. Wind the central barrel of the strainer clockwise to tension the wire. When complete, the strainer remains in situ and can be re -tightened if the wire loses tension.

Premium quality, Canadian Western Red Cedar, planed finish with four rounded corners.
A popular product for building superior quality slatted fence screening. Cedar is a naturally durable timber species that will deliver many years of service.

- Machined From: 1" x 2" x 6' (25.4 x 50.8 x 1830mm)
- Finished Size: 18 x 44 x 1830mm
- Grade: Number 2, clear and better

Premium quality, Canadian Western Red Cedar, planed finish with four rounded corners.
A popular product for building superior quality slatted fence screening. Cedar is a naturally durable timber species that will deliver many years of service.

- Machined From: 1" x 2" x 8' (25.4 x 50.8 x 2438mm)
- Finished Size: 18 x 44 x 2438mm
- Grade: Number 2, clear and better

Planed and pressure-treated, joinery grade softwood.
Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 4 eased (rounded) corners
- Machined from 25 x 50mm, finished size 20 x 45mm
- 2.4m long ±5mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats

If you need help with your calculations for your screening project, please get in touch.

Planed and pressure-treated, joinery grade softwood.
Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 4 eased (rounded) corners
- Machined from 25 x 50mm, finished size 20 x 45mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats

If you need help to work out what you need for your screening project, please get in touch.

Planed and pressure-treated, joinery grade softwood.

Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls.

- Planed all round timber, with 2 eased (rounded) corners
- Machined from 25 x 75mm, finished size 20 x 70mm
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below
- 12.5 linear metres needed to cover 1m², this is based on a 10mm gap between slats
- We recommend fitting vertical battens at 600mm centres (max.)

If you need help to work out what you need for your screening project, please get in touch.

Planed finish fencing rails with two 45° chamferred corners. Ideal for use with our planed picket slats with a smooth, premium finish but has many other uses including deck boards and bench slats.
These fencing rails are pressure treated green; 15 year Treat-Right Warranty.

- Planed all round timber, with two 45° chamfered corners
- Machined from: 32 x 100mm x 2.4m
- Finished Size: 28 x 95mm x 2.4m
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below

Planed finish fencing rails with two 45° chamferred corners. Ideal for use with our planed picket slats with a smooth, premium finish but has many other uses including deck boards and bench slats.
These fencing rails are pressure treated green; 15 year Treat-Right Warranty.

- Planed all round timber, with two 45° chamfered corners
- Machined from: 32 x 100mm x 3.6m
- Finished Size: 28 x 95mm x 3.6m
- High quality, slow grown redwood
- Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below

1.35m Fencing pin with lamp hook, made from 10mm steel reinforcing bar (rebar). Pointed for driving in. Perfect for temporary barrier fencing. Hook designed to hang a safety lantern.

- 10mm steel rebar, self-coloured
- 1.35m long
- Pointed for driving in

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1219mm (4')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)

The Highgrove Tongue and Groove (V-joint) fence panel is a premium quality product, hand made in the U.K. It is made with planed finish, joinery grade, pressure treated redwood and has stainless steel fixings. This high-spec. product is very sturdy and built to last, offering a long-term, cost-effective fencing solution. We also stock a matching Highgrove pedestrian gate.

Height: 1524mm (5')
Width: 1829mm (6')

- Heavy Duty,
- Top & Bottom Rails: 45 x 95mm
- Intermediate Battens: 27 x 45mm
- Tongue & Groove (V-joint) cladding: ex. 19 x 125mm (approx. 14 x 115mm finished size)
- Planed finish, joinery grade redwood,
- Stainless steel fixings
- Pressure Treated with 15 year Treat-Right Warranty (view details in Downloads tab below)