Fencing Materials

2750mm GALV CHAINLINK STRETCHER BAR

Chain link fencing is wire mesh, woven into a diamond pattern. A popular style of fencing for sports grounds and for security purposes. It can be installed using timber posts or with metal posts which are specifically designed to suit chain link. Supplied in tightly wound rolls.

• Finish: Green P.V.C Coating
• Height: 2750mm
• Roll Length: 12.5m
• Mesh Size: 50 x 50mm
• Wire Gauge: 2.24/3.15mm (Inner wire= 2.24mm, overall thickness inc. green coating= 3.15mm)
• Green chain link has a galvanised wire core to ensure longevity
• 65m of 2.60/4.00mm line wire included with each roll
• Manufactured to BS EN 10223-6 1998
• Stretcher Bars, angle cleats etc. sold separately

* This is a special order item, typically available within 1-2 working days

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

A general purpose straining wire, mainly used for fencing purposes. Can be shaped by hand and cut with heavy duty wire cutters.

- 3.15mm Overall Thickness (including galvanised coating)
- 10kg Roll (approx. 164 meters)
- Galvanised Finish
- Manufactured to BS 4102
- Galvanised to BS EN 10244-2

A general purpose straining wire, mainly used for fencing purposes. Can be shaped by hand and cut with heavy duty wire cutters.

- 3.15mm Overall Thickness (including galvanised coating)
- 5kg Roll (approx. 82 meters)
- Galvanised Finish
- Manufactured to BS 4102
- Galvanised to BS EN 10244-2

3.6m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 128mm x 125mm x 3680mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 89kg Each
- C50 Concrete (a strong mix)
- Four 6.5mm rebar set inside

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: 300mm
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 300mm x 1829mm
- 44kg Each
- C50 Concrete (a strong mix)
- Three 5.5mm rebar set inside.

30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.

- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel

35mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel.

- Fits fence panels up to 35mm thick
- Galvanised Steel

Gravel board packers are fitted to the bottom of a fence post, this ensures the gravel board fits flush with the bottom of the featheredge (when fixing 38 x 88mm rails to the face of the posts).

- 150mm lengths
- Fully pressure treated
- Typically one packer required per post

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 3.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 3.6m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green