Fencing Materials

Traditional hinge joint stock fencing, the ideal stock fence to contain animals such as sheep and pigs. Typically fixed to wooden stakes with staples.

Manufactured in the UK to BS EN 10223-5.
The wire this fencing is made from is produced to BS4102.
Fully galvanised to BS EN 10244-2 Class A.

Pattern: C8/80/15
Height: 800mm
Roll length: 50m
Number of horizontal line wires: 8
Distance between vertical stay wires: 150mm

Top & bottom line wires: 3.0mm diameter
Intermediate line wires: 2.5mm diameter
Stay (vertical) wires: 2.5mm diameter

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Traditional galvanised wire hinge joint stock fencing, the ideal stock fence to contain animals such as sheep and pigs. Normally fixed to wooden stakes with staples.
It is manufactured in the UK to BS EN 10223-5.
The wire used is produced to BS4102.
It is fully galvanised to BS EN 10244-2 Class A.

Pattern: L10/120/15:
Mild steel
Height: 1200mm
Roll length: 50m
Number of horizontal line wires: 10
Distance between vertical stay wires: 150mm

Top & bottom line wires: 2.5mm diameter
Intermediate line wires: 1.9mm diameter
Stay (vertical) wires: 1.9mm diameter

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1500mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 28kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

General purpose galvanised tying wire that has lots of uses around the home. Often used to support climbing plants. Can be shaped by hand and cut with pliers.

- 1.6mm Overall Thickness (including galvanised coating)
- 0.5kg Roll (approx. 30 meters)
- Galvanised Finish
- Manufactured to BS 4102

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1800mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 35kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Decorative wooden Acorn Finial to fit 75 x 75mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps, sold separately.

- Dimensions: 153mm High x 81mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

Decorative wooden Ball Finial to fit 100 x 100mm fence posts. Pressure treated green, supplied with a double ended screw for hidden fixing. Normally used in conjunction with Standard Post Caps, sold separately.

- Dimensions: 123mm High x 93mm Diameter
- Smooth machined finish
- Pressure treated green
- Double ended screw included

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The bolt-clamp on the side of the post support ensures a quick and secure fit. The rectangular base plate enables flush fitting next to walls/obstructions, it's also a good fit when mounted on top of walls.

- Designed to fit 100 x 100mm square wooden posts
- Bolt-Grip post securing system
- Bolt down plate: 108mm x 205mm - flush fitting
- Bolt holes: 4 x 12mm Ø holes for bolting down the base
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to hold a 100 x 100mm square wooden post in position when it’s not possible to concrete a post into the ground. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Fin-Grip post securing system
- Bolt down plate: 170mm x 170mm
- Bolt holes: 4 x 12mm Ø holes for bolting down the base (approx. 135mm hole centres)
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors