Fencing Materials

1.8m Slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1800mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 35kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

General purpose galvanised tying wire that has lots of uses around the home. Often used to support climbing plants. Can be shaped by hand and cut with pliers.

- 1.6mm Overall Thickness (including galvanised coating)
- 0.5kg Roll (approx. 30 meters)
- Galvanised Finish
- Manufactured to BS 4102

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

1.5m slotted concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 1500mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 28kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Traditional galvanised wire hinge joint stock fencing, the ideal stock fence to contain animals such as sheep and pigs. Normally fixed to wooden stakes with staples.
It is manufactured in the UK to BS EN 10223-5.
The wire used is produced to BS4102.
It is fully galvanised to BS EN 10244-2 Class A.

Pattern: L10/120/15:
Mild steel
Height: 1200mm
Roll length: 50m
Number of horizontal line wires: 10
Distance between vertical stay wires: 150mm

Top & bottom line wires: 2.5mm diameter
Intermediate line wires: 1.9mm diameter
Stay (vertical) wires: 1.9mm diameter

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Traditional hinge joint stock fencing, the ideal stock fence to contain animals such as sheep and pigs. Typically fixed to wooden stakes with staples.

Manufactured in the UK to BS EN 10223-5.
The wire this fencing is made from is produced to BS4102.
Fully galvanised to BS EN 10244-2 Class A.

Pattern: C8/80/15
Height: 800mm
Roll length: 50m
Number of horizontal line wires: 8
Distance between vertical stay wires: 150mm

Top & bottom line wires: 3.0mm diameter
Intermediate line wires: 2.5mm diameter
Stay (vertical) wires: 2.5mm diameter