Fixings & Metalwork

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance.

Thickness: 1.0mm
Width: 34mm x 39mm
Length: 63mm
Fixing Holes: 3.5mm (x8)

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

Thickness: 1.0mm
Width: 36mm x 37mm
Length: 113mm
Slot in Corner: 41mm
Fixing Holes: 3.5mm (x12)

Everbuild General Purpose Silicone is a Multi-Purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth

BENEFITS
- Permanently flexible.
- Anti-fungal formula - prevents mould growth.
- Quick curing - low dirt pick up.
- Low viscosity for fast application.

AREAS FOR USE
- Sealing glass to glass.
- Sealing glass to aluminium and metal sealing.
- Sealing around baths, showers, basins and other sanitary ware.
- As an adhesive for fixing PVCu trims, cladding and panels.
- Sealing around worktops and laminates.
- Cap glazing to metal, timber and PVCu window frames, and pointing round window and door frames.
- For aluminium gutter sealing.
- General draughtproofing.

- Plastic colour coded flat glazing packers (28mm x 100mm)
- Mixed pack of 6 thicknesses
- Designed for aligning and levelling double-glazed sealed units

Pack contains (approx):
1mm - Green, quantity 25
2mm - Black, quantity 15
3mm - White, quantity 15
4mm - Grey, quantity 15
5mm - Blue, quantity 15
6mm - Red, quantity 15

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width