Gates & Gate Fittings

All fixings included.

These BZP strap hinges are most commonly used for hanging bifolding gates.

Plain black ring latch that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.

Galvanised for durability, these plain ring latches that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom.
The bolt can also be used to hold the gate open if required.

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom.
The bolt can also be used to hold the gate open if required.

Once fitted these return springs ensure that the gate returns to the closed position.
Fixings & instructions included in the pack.

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom.
The bolt can also be used to hold the gate open if required.

A heavy-duty galvanised double strap bottom band, for hanging a 75mm thick five bar gate.
An M10 x 100mm carriage bolt should be fitted through the slot of this fitting and through the hanging stile of the gate. The slot allows plenty of adjustment to level the gate.

- Length: 125mm
- Depth: 50mm
- Internal Width: 75mm
- Hanging eye for 19mm hook
- Slotted for M10 carriage bolt
- Galvanised finish

Hanging pins and fixings sold separately.

Hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges for suitable for hanging heavy duty gates & doors.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Fixings sold separately.

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

Available painted black or hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges are ideal for hanging heavy duty gates & doors.
The crank allows the gate to sit flush with the post if hanging on the front or the back of the post.

As a general rule we recommend using hinges that cover half the width of the gate/door.
Fixings sold separately.

Twisted black ring latch that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.

Galvanised for durability, these twisted ring latches that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.

Spring loaded sliding bolt, ideal for use on gates, garage doors.
Fixings included in the pack.