Gates & Gate Fittings

Hot dip galvanised to ensure resistance to corrosion & rust, these hook & band hinges for suitable for hanging heavy duty gates & doors.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Fixings sold separately.

Heavy duty hinges ideal for use on high-use/heavy gates and external doors, these robust hinges provide adjustability, allowing the installer to easily align gates during fitting and also give adjustment after fitting to compensate for gate drop over time.
Available from stock galvanised and to order in epoxy black finish.

Fixings sold separately.

Galvanised adjustable bottom gate fitting for 3" (75mm) thick gate. The eye takes a 19mm pin.

Hand-forged by master craftsmen using traditional methods to achieve a unique product made to the highest standards.

These T Hinges have a ‘penny shaped’ round end and is one of our most popular choices for hanging ledged and braced/plank doors.

They are hot forged i.e. drawn to shape, not welded or fabricated and with the knuckle being fashioned in the traditional way it makes for a very strong product.

The traditional way of choosing a hinge size means it should reach two thirds of the way across the door but providing it reaches at least half way across it should carry the weight of most doors with no problems. For especially heavy doors a third hinge can be used (three on one door).

Sold as a set and supplied with necessary fixing screws.

ANVIL 33122: GOTHIC HOOK - BEES WAX

Hand-forged by master craftsmen using traditional methods to achieve a unique product made to the highest standards.

These T Hinges have a ‘penny shaped’ round end and is one of our most popular choices for hanging ledged and braced/plank doors.

They are hot forged i.e. drawn to shape, not welded or fabricated and with the knuckle being fashioned in the traditional way it makes for a very strong product.

The traditional way of choosing a hinge size means it should reach two thirds of the way across the door but providing it reaches at least half way across it should carry the weight of most doors with no problems. For especially heavy doors a third hinge can be used (three on one door).

Sold as a set and supplied with necessary fixing screws.

Padlockable gate catch, ideal for smaller gates such as the Hampton gate or picket style gates. Once the striker has closed into the keep it stays shut.
All fixings included in the pack.

Padlockable gate catch, ideal for smaller gates such as the Hampton gate or picket style gates. Once the striker has closed into the keep it stays shut.
All fixings included in the pack.

Made to measure from softwood or Iroko (an African hardwood renowned for its durability & stability), the Beckington benefits from mortice & tenoned construction & a heavy duty bottom rail suitable for automation as standard.
Beckington Gates can be made up to 9' (2.743m) wide per gate and up to 8' (2.438m) high, with a convex or concave top.

The Beckington should be treated with wood preservative & a treatment of choice.

The stiles on the Beckington Gate can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

All fixings included.

All fixings included.

BLACK LONG THROW LOCK HANDLE

BLACK PULL HANDLE FOR EURO PROFILE LOCK

BRASS LONG THROW LOCK HANDLE

Available in Iroko (hardwood) & softwood, Cameo Gates make an attractive entrance.
Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice.

Made to order using a strong, morticed & tenoned construction, Cameo Gates are made to measure from 3' (0.915m) to 7' (2.13m) wide & 3'6" (1.067m) to 8' (2.438m) high per gate.
Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail.

The stiles can also be rebated so that the gates close against each other.