Gates & Gate Fittings

The thumb piece passes through the door and raises the latch bar off the keep.
All fixings are included.

The thumb piece passes through the door and raises the latch bar off the keep.
All fixings are included.

Available in Iroko (hardwood) & softwood, Swept Top Manor Gates make an impressive entrance.
Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice.

Made to order using a strong, morticed & tenoned construction, Swept Top Manor Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high.
Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail.

The stiles on the Swept Top Manor Gates can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

Light duty catch, popular for use in animal housing.

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate.
The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time.

Set includes:
1x 450mm (18") double strap top band
1x Adjustable bottom gate fitting
1x 19mm hook to drive
1x 19mm hook to bolt
All necessary fixings
Galvanised finish

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate.
The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time.

Set includes:
1x 600mm (24") double strap top band
1x Adjustable bottom gate fitting
1x 19mm hook to drive
1x 19mm hook to bolt
All necessary fixings
Galvanised finish

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate.
The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time.

Set includes:
1x 450mm (18") double strap top band
1x Adjustable bottom gate fitting
2x 19mm hooks on 100 x 100mm plates
All necessary fixings
Galvanised finish

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate.
The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time.

Set includes:
1x 600mm (24") double strap top band
1x Adjustable bottom gate fitting
2x 19mm hooks on 100 x 100mm plates
All necessary fixings
Galvanised finish

This galvanised field gate hinge set has an off-set bottom pivot point (rocker plate) which causes the swinging end of a field gate to rise as it opens. The rising effect allows the gate to open on an incline. The off-set pivot point causes the gate to return to the centre when not held in the open position, this works as a self-closing mechanism. This type of hinge is often used for pedestrian field gates to ensure that gates aren't accidentally left open.

The rising effect is more prominent with longer gates. The approximate rise (at the swinging end) is 75mm per metre of gate width - e.g. if fitted to a 10' (3.05m) gate, the rise at the swinging end is approx. 229mm.

Suitable for hanging 75mm thick wooden field gates, this hinge this type of hinge can only be fitted between posts (not on the back of posts), which allows the gate to swing forward and backwards.

Set includes:
1x 600mm (24") double strap top band
1x bottom gate fitting with rocker plate
1x field gate hook to bolt
All necessary fixings
Galvanised finish

The Hampton is a classic garden gate, constructed from high quality pressure-treated softwood. It has a sturdy frame made with morticed and tennoned joints and T&G cladding. This gate can be hinged for left hand or right hand opening; and hung individually or as a pair.

- Width: 914mm (3')
- Overall Height: 1067mm (3' 6")
- Height to top of top rail: 993mm (3' 3")
- Gate Thickness: 45mm
- Can be hung for left or right-hand opening

The Hampton is a classic garden gate, constructed from high quality pressure-treated softwood. It has a sturdy frame made with morticed and tennoned joints and T&G cladding. This gate can be hinged for left hand or right hand opening; and hung individually or as a pair.

- Width: 1067mm (3'6")
- Overall Height: 1067mm (3' 6")
- Height to top of top rail: 993mm (3' 3")
- Gate Thickness: 45mm
- Can be hung for left or right-hand opening

The Hampton is a classic garden gate, constructed from high quality pressure-treated softwood. It has a sturdy frame made with morticed and tennoned joints and T&G cladding. This gate can be hinged for left hand or right hand opening; and hung individually or as a pair.

- Width: 1219mm (4')
- Overall Height: 1067mm (3' 6")
- Height to top of top rail: 993mm (3'3")
- Gate Thickness: 45mm
- Can be hung for left or right-hand opening

Specialist field gate hinge with the eye on the corner of the hinge.
The off set hinge has the eye set at approximately 45 degree angle from the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBOEC125

Specialist field gate hinge with the eye on the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBSEC125

A heavy-duty galvanised double strap bottom band, for hanging a 75mm thick five bar gate.
An M10 x 100mm carriage bolt should be fitted through the slot of this fitting and through the hanging stile of the gate. The slot allows plenty of adjustment to level the gate.

- Length: 125mm
- Depth: 50mm
- Internal Width: 75mm
- Hanging eye for 19mm hook
- Slotted for M10 carriage bolt
- Galvanised finish

Hanging pins and fixings sold separately.