Tools, Safety & Workwear

The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.

- 152mm Total Length
- 100mm Working Length
- 1/4" hexagonal shank, compatible with adaptors or chucks with a built-in quick-release feature.

The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.

- 152mm Total Length
- 100mm Working Length
- 1/4" hexagonal shank, compatible with adaptors or chucks with a built-in quick-release feature.

The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension.

The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.

This Irwin Auger drill bit has the following dimensions:
Drillbit diameter: 26.0mm
Total length: 191mm
Working Length: 126mm

The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.

- 152mm Total Length
- 100mm Working Length
- 1/4" hexagonal shank, compatible with adaptors or chucks with a built-in quick-release feature.

These Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit.

Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through.

The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.

3 piece set comprising 1 of each: 20, 22 and 25mm. (Length 165mm).

The Advent ASR Precision Steel Rule is made from stainless steel with permanent etched graduations.
- Class 2 Accurate.
- 300mm / 12in
- One side of the rule has metric markings and the other side has imperial markings.

The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.

- 152mm Total Length
- 100mm Working Length
- 1/4" hexagonal shank, compatible with adaptors or chucks with a built-in quick-release feature.

The Roughneck Gorilla Bar® has a low profile claw that fits further under the workpiece for increased prying power and the wider claw surface offers better control whilst resisting sinking into the support surface.

Made from drop-forged alloy steel hardened and tempered, with polished tips, and oval shaped for better control and strength.

The Roughneck Gorilla Utility Bar™ is made from hardened and tempered alloy steel with an ‘I’ section profile which offers much greater strength than traditional flat bars. It incorporates a flat anvil on the neck for striking, 3 integral nail pullers and polished tips.

Size: 375mm (15in).

The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.

- 152mm Total Length
- 100mm Working Length
- 1/4" hexagonal shank, compatible with adaptors or chucks with a built-in quick-release feature.

The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.

The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.

Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes.
For best performance power drill should be held in a stand.
For a perfect grain match use an offcut from the timber being plugged.
To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.

Set of Four - Cuts size 6 (7mm), 8 (8mm), 10 (10mm) and 12 (11.5mm) Plugs

Hardened high quality steel with an extremely strong fibreglass handle.

The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.

The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.

Heavy duty cargo lash with claw attachment

- Lashing Capacity: 2500daN (Decanewton)
- Minimum Breaking Force (when new): 5000kg
- Standard Hand Force: 50daN
- Standard Tension Force: 350daN
- Total length (ratchet & webbing combined): 8m
- Webbing Elongation at Lashing Capacity: <7%
- Manufactured in accordance with EN 12195-2:2000
- Not suitable for lifting