Fencing Materials

This post support is designed to fit a 100 x 100mm square wooden post. The post support is driven 750mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The metal fins inside of the post support wedge into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 750mm
- Post Socket Length: 150mm
- Fin-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The post support is driven 750mm into the ground by inserting a driving tool (sold separately) & hitting with a sledge hammer. The bolt-clamp on the side of the post support ensures a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 750mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 75 x 75mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

This post support is designed to fit a 100 x 100mm square wooden post. The bottom section of the post support is designed to be concreted into the ground. The metal fins inside of the post support bite into the timber post ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- Concrete in length: 150mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

This post extender is designed to extend a 75 x 75mm square wooden post. The metal fins inside of the post extender bite into the timber ensuring a quick and secure fit.

- Designed to fit 75 x 75mm square wooden posts
- External measurements: 81mm x 81mm x 175mm
- Internal midway stop-point to enable easy installation
- Manufactured from 2mm thick steel
- Welded construction
- Brown powder coat finish for durability outdoors

This post extender is designed to extend a 100 x 100mm square wooden post. The metal fins inside of the post extender bite into the timber ensuring a quick and secure fit.

- Designed to fit 100 x 100mm square wooden posts
- External measurements: 107mm x 107mm x 175mm
- Internal midway stop-point to enable easy installation
- Manufactured from 2mm thick steel
- Welded construction
- Brown powder coat finish for durability outdoors

Ideal to use for repairing damaged fence posts which have broken off at ground level but are in a sound concrete base.

Ideal to use for repairing damaged fence posts which have broken off at ground level but are in a sound concrete base.

- Designed to fit 100 x 100mm square wooden posts
- Spike length: 300mm
- Post Socket Length: 150mm
- Bolt-Grip post securing system
- Manufactured from 2mm thick steel
- Welded construction
- Galvanised finish for durability outdoors

Orange Barrier Fencing 1.0m x 50m (4kg), ideal as a temporary safety barrier in many situations. Instant fencing, highly visible, durable and weather resistant. Often used in conjunction with metal fencing pins.

- Height: 1.0m
- Roll Length: 50m
- Hole size: 40mm x 100mm
- 4kg Roll

1.35m Fencing pin with lamp hook, made from 10mm steel reinforcing bar (rebar). Pointed for driving in. Perfect for temporary barrier fencing. Hook designed to hang a safety lantern.

- 10mm steel rebar, self-coloured
- 1.35m long
- Pointed for driving in