Fixings & Metalwork

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 8mm
Anchor Length - 75mm
Washer Size - 10mm (M10)
Min Hole Depth - 55mm
Min Over Drill Depth - 15mm
Min. Embed Depth - 40mm
Max. Fixture Thickness - 35mm
Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 15mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 40Nm

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance.

Thickness: 1.0mm
Width: 34mm x 39mm
Length: 63mm
Fixing Holes: 3.5mm (x8)

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 100mm x 19mm
Overall Length: 100mm x 19mm
Fixing Holes: 6.0mm (x5)

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 8mm
Anchor Length - 100mm
Washer Size - 10mm (M10)
Min Hole Depth - 55mm
Min Over Drill Depth - 15mm
Min. Embed Depth - 40mm
Max. Fixture Thickness - 60mm
Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 15mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 40Nm

Red plastic plugs, fix into concrete, brick and masonry by drilling a 5.5mm hole, suitable for use with woodscrews.

- Red wall plugs are suitable for No.6 - No.10 (3.5mm - 5.0mm) screws.
- Plug Length: 30mm
- Use a 5.5mm masonry drill bit

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 75mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 25mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Spare nozzle for Exocet Polyester Resin

The Simpson Strong-Tie EA554, is a light yet sturdy Reinforced Angle Bracket (reinforced in corner). A metal bracket for strengthening corners and connecting a wide range items. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 40mm
Length: 53mm x 53mm
Fixing Holes: 11.0mm (x2) + 5.0mm (x8)

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

Thickness: 1.0mm
Width: 36mm x 37mm
Length: 113mm
Slot in Corner: 41mm
Fixing Holes: 3.5mm (x12)

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Brown plastic plugs, fix into concrete, brick and masonry by drilling a 7.0mm hole, suitable for use with woodscrews.

- Brown plugs are suitable for No.8 - No.12 (4.0mm - 6.0mm) screws
- Plug Length: 36mm
- Use a 7.0mm masonry drill bit