Gates & Gate Fittings

Heavy-duty galvanised double strap top band for 75mm thick five bar gate.

- Length: 450mm
- Depth: 50mm
- Internal Width: 75mm
- Hanging eye for 19mm hook
- Three bolt holes to suit M10 carriage bolts
- Galvanised finish

Hanging pins and fixings sold separately.

Padlockable sliding gate bolt.
All fixings included.

This galvanised set includes: spring fastener, staple catch, keep & all required fixings.

Specialist field gate hinge with the eye on the corner of the hinge.
The off set hinge has the eye set at approximately 45 degree angle from the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBOEC125

Specialist field gate hinge with the eye on the corner of the hinge.

Fits a 19mm hanging pin.

Hanging pins & fixings are sold separately.

Please note that this item is not stocked.
Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below. Product code: 7IFGTBSEC125

Black hook on plate, for use with hinges with a 19mm eye.

19mm gate hanger designed to be built into brickwork. This item is galvanised for corrosion resistance.

Curved hook & band hinges, used for hanging gates with a curved frame, such as the Reinas & Madrid.
Fixings sold separately.

Curved hook & band hinges, used for hanging gates with a curved frame, such as the Reinas & Madrid.
Fixings sold separately.

Electro-galvanised to ensure resistance to corrosion & rust, these tee hinges are ideal for hanging our timber garden gates & shed doors.
As a general rule we recommend using hinges that cover half the width of the gate/door.

Fixings are sold separately.

Foot operated latch for stable doors & field gates, allowing entry when your hands are full.
All fixings included.

Used when you need to close the gate in between the posts, the morticed field gate latch is designed to fit a 75mm stile.

A Throw Over Gate Loop with lifting handle is used to secure a pair of wooden five bar gates in the middle when in the closed position. The galvanised gate loop is fitted to the top rail of the closing gate with the included carriage bolt. For best results; drop bolts should also be fitted to secure the bottom of both gates (sold separately).

Overall Length: 350mm
Maximum Top Rail Width: 75mm
Minimum Top Rail Depth: 75mm
Galvanised finish
Carriage bolt included

With a textured dull black finish, this suffolk latch gives a decorative detail to gates & doors. Can be operated from both sides.
All fixings included.

A galvanised metal bracket set designed to hold a removable, sliding fence rail. Often used as a cheaper alternative to a field gate. A rotating catch is incorporated, this slots into a notch cut into the sliding rail. The catch prevents the rail being accidently removed when animals push against it.

Maximum rail size: 50mm x 110mm
Fixings included