These Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit.
Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through.
The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.
3 piece set comprising 1 of each: 20, 22 and 25mm. (Length 165mm).
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.
Set of Four - Cuts size 6 (7mm), 8 (8mm), 10 (10mm) and 12 (11.5mm) Plugs
The DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes.
Brad point drill bits are suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood.
This DEWALT 5 Piece Brad Point Drill Bit Set contains of of each ofthe following sizes: 4 x 80mm, 5 x 90mm, 6 x 100mm, 8 x 120mm, 10 x 133mm
The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.
Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.
This IRWIN® Blue Groove 4X Wood Flat Bit Set is supplied in a branded nylon case. Contains the following:
The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.
The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.
The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.
The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.
Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.
The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.
Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.
The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.
Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.
Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.
The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.
Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.
The Irwin Long Series Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips.
Increased relief angle from 12° to 17°. The shank is 400mm in length and 10% larger in diameter for added durability.
Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.
The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.
Faithfull Flat bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills
Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.