Gates & Gate Fittings

A smaller alternative to brenton bolts.
Fixings are included in the pack.

A smaller alternative to brenton bolts.
Fixings are included in the pack.

PADLOCK PROTECTOR CLASP - GREY

This kit includes a pair of 350mm tee hinges, an auto gate catch & all the screws required to fit them.
Ideal for hanging small gates like the hampton & picket gates.

This kit includes a pair of 350mm tee hinges, an auto gate catch & all the screws required to fit them.
Ideal for hanging small gates like the hampton & picket gates.

Plain black ring latch that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.

Galvanised for durability, these plain ring latches that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down).
Fixings & fitting instructions included.

All fixings included.

All fixings included.

Stainless Steel press fit security collar, designed to prevent gates from being lifted off of a 19mm hook.

A central closing catch designed to suit the spring gate fastener set. This catch enables the gate to be latched when hung between posts instead of on the back of posts. Galvanised finish for durability.

Catch length: 150mm
Catch depth: 35mm (max)
Fixing holes: two holes - 12mm Ø

RIM LOCK HANDLE

This galvanised field gate hinge set has an off-set bottom pivot point (rocker plate) which causes the swinging end of a field gate to rise as it opens. The off-set pivot point causes the gate to return to the centre when not held in the open position.

- The approximate rise (at the swinging end) is 75mm per metre of gate width - e.g. if fitted to a 10' (3.05m) gate, the rise at the swinging end is approx. 229mm.
- Suitable for hanging 75mm thick wooden field gates.
- This hinge this type of hinge can only be fitted between posts (not on the back of posts), which allows the gate to swing forward and backwards.
- The minimum post size that the rocker plate can be fitted to is 175mm.

Set includes:
1x 600mm (24") double strap top band
1x bottom gate fitting with rocker plate
1x field gate hook to bolt
All necessary fixings
Galvanised finish

Padlockable gate catch, that stays shut once the striker has gone into the keep.
Fixings included.

A galvanised metal bracket set designed to hold a removable, sliding fence rail. Often used as a cheaper alternative to a field gate. A rotating catch is incorporated, this slots into a notch cut into the sliding rail. The catch prevents the rail being accidently removed when animals push against it.

Maximum rail size: 50mm x 110mm
Fixings included